NAME¶

vncviewer - VNC viewer for X

SYNOPSIS¶

vncviewer [options] [host][:display#]
vncviewer [options] [host][::port]
vncviewer [options] -listen [port]

DESCRIPTION¶

vncviewer is a viewer (client) for Virtual Network Computing. This manual page documents version 4 for the X window system.

If you run the viewer with no arguments it will prompt you for a VNC server to connect to. Alternatively, specify the VNC server as an argument, e.g.:

where 'snoopy' is the name of the machine, and '2' is the display number of the VNC server on that machine. Either the machine name or display number can be omitted. So for example ":1" means display number 1 on the same machine, and "snoopy" means "snoopy:0" i.e. display 0 on machine "snoopy".

If the VNC server is successfully contacted, you will be prompted for a password to authenticate you. If the password is correct, a window will appear showing the desktop of the VNC server.

AUTOMATIC PROTOCOL SELECTION¶

The viewer tests the speed of the connection to the server and chooses the encoding and pixel format (color level) appropriately. This makes it much easier to use than previous versions where the user had to specify arcane command line arguments.

The viewer normally starts out assuming the link is slow, using the encoding with the best compression. If it turns out that the link is fast enough it switches to an encoding which compresses less but is faster to generate, thus improving the interactive feel.

The viewer normally starts in full-color mode, but switches to low-color mode if the bandwidth is insufficient. However, this only occurs when communicating with servers supporting protocol 3.8 or newer, since many old servers does not support color mode changes safely.

Automatic selection can be turned off by setting the AutoSelect parameter to false, or from the options dialog.

POPUP MENU¶

The viewer has a popup menu containing entries which perform various actions. It is usually brought up by pressing F8, but this can be configured with the MenuKey parameter. Actions which the popup menu can perform include:

By default, key presses in the popup menu get sent to the VNC server and dismiss the popup. So to get an F8 through to the VNC server simply press it twice.

FULL SCREEN MODE¶

A full-screen mode is supported. This is particularly useful when connecting to a remote screen which is the same size as your local one. If the remote screen is bigger, you can scroll by bumping the mouse against the edge of the screen.

Unfortunately this mode doesn't work completely with all window managers, since it breaks the X window management conventions.

OPTIONS (PARAMETERS)¶

You can get a list of parameters by giving -h as a command-line option to vncviewer. Parameters can be turned on with -param or off with -param=0. Parameters which take a value can be specified as -param value. Other valid forms are param=value -param=value --param=value. Parameter names are case-insensitive.

Many of the parameters can also be set graphically via the options dialog box. This can be accessed from the popup menu or from the "Connection details" dialog box.

-display Xdisplay

Specifies the X display on which the VNC viewer window should appear.

-geometry geometry

Standard X position and sizing specification.

-listen [port]

Causes vncviewer to listen on the given port (default 5500) for reverse connections from a VNC server. WinVNC supports reverse connections initiated using the 'Add New Client' menu option or the '-connect' command-line option. Xvnc supports reverse connections with a helper program called vncconfig.

-passwd password-file

If you are on a filesystem which gives you access to the password file used by the server, you can specify it here to avoid typing it in. It will usually be "~/.vnc/passwd".

-passwdInput true, false

Force standard vnc dialog to getting password and reads password from stdin. Default is false(shows dialog window)

-Shared

When you make a connection to a VNC server, all other existing connections are normally closed. This option requests that they be left open, allowing you to share the desktop with someone already using it.

-ViewOnly

Specifies that no keyboard or mouse events should be sent to the server. Useful if you want to view a desktop without interfering; often needs to be combined with -Shared.

-FullScreen

Start in full-screen mode.

-DesktopSize widthxheight

Instead of keeping the existing remote screen size, the client will attempt to switch to the specified since when connecting. If the server does not support the SetDesktopSize message then the screen will retain the original size.

-AutoSelect

Use automatic selection of encoding and pixel format (default is on). Normally the viewer tests the speed of the connection to the server and chooses the encoding and pixel format appropriately. Turn it off with -AutoSelect=0.

-FullColor, -FullColour

Tells the VNC server to send full-color pixels in the best format for this display. This is default.

-LowColorLevel, -LowColourLevel level

Selects the reduced color level to use on slow links. level can range from 0 to 2, 0 meaning 8 colors, 1 meaning 64 colors (the default), 2 meaning 256 colors. Note that decision if reduced color level is used is made by vncviewer. If you would like to force vncviewer to use reduced color level use -AutoSelect=0 parameter.

-PreferredEncoding encoding

This option specifies the preferred encoding to use from one of "Tight", "ZRLE", "hextile" or "raw".

-UseLocalCursor

Render the mouse cursor locally if the server supports it (default is on). This can make the interactive performance feel much better over slow links.

-WMDecorationWidth w, -WMDecorationHeight h

The total width and height taken up by window manager decorations. This is used to calculate the maximum size of the VNC viewer window. Default is width 6, height 24.

-log logname:dest:level

Configures the debug log settings. dest can currently be stderr or stdout, and level is between 0 and 100, 100 meaning most verbose output. logname is usually * meaning all, but you can target a specific source file if you know the name of its "LogWriter". Default is *:stderr:30.

-MenuKey keysym-name

This option specifies the key which brings up the popup menu. The key is specified as an X11 keysym name (these can be obtained by removing the XK_ prefix from the entries in "/usr/include/X11/keysymdef.h"). Default is F8.

-via gateway

Automatically create encrypted TCP tunnel to the gateway machine before connection, connect to the host through that tunnel (TigerVNC-specific). By default, this option invokes SSH local port forwarding, assuming that SSH client binary can be accessed as /usr/bin/ssh. Note that when using the -via option, the host machine name should be specified as known to the gateway machine, e.g. "localhost" denotes the gateway, not the machine where vncviewer was launched. The environment variable VNC_VIA_CMD can override the default tunnel command of /usr/bin/ssh -f -L "$L":"$H":"$R" "$G" sleep 20. The tunnel command is executed with the environment variables L, H, R, and G taken the values of the local port number, the remote host, the port number on the remote host, and the gateway machine respectively.

-SecurityTypes security-type

Comma-separated list of which security type(s) to use. Types include VeNCrypt, X509Plain, TLSPlain, X509Vnc, TLSVnc, X509None, TLSNone, VncAuth, None. The list must start with VeNCrypt for the X509 and TLS types. For example, -SecurityTypes=VeNCrypt,TLSVnc

Description of options:

SEE ALSO¶

Xvnc(1), vncpasswd(1), vncconfig(1), vncserver(1)
http://www.tigervnc.org

AUTHOR¶

Tristan Richardson, RealVNC Ltd.

VNC was originally developed by the RealVNC team while at Olivetti Research Ltd / AT&T Laboratories Cambridge. TightVNC additions were implemented by Constantin Kaplinsky. Many other people participated in development, testing and support.